CU/XLPE/IS-OS/SWA/PVC

Detail Kabel CU/XLPE/IS-OS/SWA/PVC

CU/XLPE/IS-OS/SWA/PVC adalah kabel yang digunakan untuk menghubungkan instrumen dan sistem kontrol untuk transmisi sinyal analog atau digital. Kabel ini tidak boleh dihubungkan langsung ke suplai listrik utama atau sumber impedansi rendah lainnya dan tidak dirancang untuk digunakan sebagai catu daya. Cocok untuk aplikasi yang ditanam langsung.

Cable Construction :

* Conductor	Plain Annealed Copper wire class 2 according to IEC 60228
* Insulation	Extruded XLPE ( Crosslinked Polyethylene )
* Individual Screen	Helically Overlapped Polyester Tape Tinned Annealed Copper Wire 0.5 mm2 ( 20/0.18 mm ) Helically Overlapped Single coated Aluminium Tape contacted with drain wire Helically Overlapped Polyester Tape
* Overall Screen	Helically Overlapped Polyester Tape Tinned Annealed Copper Wire 0.5 mm2 ( 20/0.18 mm ) Helically Overlapped Single coated Aluminium Tape contacted with drain wire Helically Overlapped Polyester Tape
* Inner Sheath	Extruded PVC Flame Retardant ( Black )
* Armour	Galvanized Steel Wire
* Outer Sheath	Extruded PVC Flame Retardant ( Black or requested by customer )

Pair Identification :

* 1 Pair	Black and White
* Multi Pair	Black and White with numbering
Amount of halogen acid gas	Max. 17% ( IEC 60754-1)
Limiting oxigen index ( LOI )	Min 30% ( IEC 60332-3 annex B )
Sunlight resistance	UL 1581 section 1200
Oil resistance	ICEA S-82-552
Flame Retardant	IEC 60332-1
Flame Propagation	IEC 60332-3 cat. A, B, C

Nominal Voltage	300 V dan 500 V
Insul Resistance	Min. 1000 MOhm/km
Test Voltage	300 V : 1000 V/1 min 500 V : 2000 V/1 min
Screen Resistance	Min 1 MOhm/km
Min.Bending Radius	6 x OD ( fixed installation )
Temperature Rating	-40° C to 70° C
Symbol	CU/XLPE/IS-OS/SWA/PVC or P1 T2 IS-OS
Applicable Standard	Multipair XLPE Insulated Instrumentation Cable Flame Retardant, UV Resistant According to BS EN 50288-7 : 2005 Voltage Designation 300 V & 500 V
P1 T2 IS-OS	XLPE Insulated, Individual and Overall Collective Screen, Armoured Other Specification are available on request
Application	Suitable for connecting instrument and control system for analogue or digital signal transmission.These cables shall not be connected directly to mains electricity supply or other low impedance sources and not designed to be used for power supply.Suitable for direct buried applications.